AC naar DC 24V 48W LED-voeding met constante spanning

Sales

AC naar DC24V 48W LED-voeding met constante spanning

Product detail

Product name: AC to DC24 V 48W Constant voltage LED power supply

Specification of slim power supply 12v 48w

SPECIFICAION
MODEL		SMT-012-048VW	SMT-024-048VW
OUTPUT	DC VOLTAGE	12V	24V
	RATED CURRENT	4.0A	2.0A
	CURRENT RANGE	0~4.0A	0~2.0A
	RATED POWER	48W	48W
	RIPPLE&NOISE(max)	120mVp-p	200mVp-p
	voltage TOLERANCE	12V±5%	24V±5%
	SETUP RISE TIME	60ms/110VAC	60ms/110VAC
	HOLD UP TIME(Typ.)	20ms/230VAC	10ms/110VAC
INPUT	VOLTAGE RANGE	100~265Vac	100~265Vac
	FREQUENCY RANGE	50~60Hz	50~60Hz
	POWER FACTOR(Typ.)
	EFFICIENCY(Typ.)	﹥83%	﹥84%
	AC CURRENT(Typ.)	0.45A/110V, 0.25A/220V	0.45A/110V,0.25A/220V
	INRUSH CURRENT (Typ.)	COLD START 30A/110~220VAC
PROTECTION	Short circuit	Protection type:recovers automatically after condition is removed
	Overload	overload protected@110%~150% above peak rating
	Over temperature	Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT	WORKING TEMP.	-25~+50℃ (Refer to output load derating curve)
	WORKING HUMIDITY	20~90% RH non condensing, refer to IP67
	Vibration	10~500Hz，2G 10min/1cycle,period for 60min,each along X,Y,Z axes
	STORAGE TEMP.,HUMIDITY	-40~+80℃,10~99%RH
SAFETY&EMC	SAFETY STANDARDS	IP67 approved; Design refer to LVD EN61347-2-13:2005,EN61347-1:2008
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC, I/P-COVER: 3KVAC , O/P-COVER:500VAC
	EMC Test Standards	EN55015:2006/A2:2009,EN61000-3-2:2006/A2:2009,EN61000-3-3:20
	MTBF	50KHours （25℃）
NOTE	1.All parameters NOT specially mentoned are measured at 110VAC, 220VAC input,rated load and 25℃ of ambient temperature.
	2.Ripple&noise are measured at 20MHz of bandwidth by using a 12


[1mProductnaam: AC naar DC

V 48W LED-voeding met constante spanning

Specificatie van slanke voeding 12v 48w

SPECIFICAIE

MODEL

SMT-012-048VW

SMT-024-048VWUITGANG

GELIJKSTROOMSPANNING

12V24V

NOMINALE STROOM

4.0A

2.0A

HUIDIG AANBOD

0~4.0A

0~2.0A

NOMINAAL VERMOGEN
48W
48W
RIMPEL & GELUID (max)
120mVp-p
200mVp-p
spanning TOLERANTIE:
12V ± 5%
24V ± 5%

STIJGTIJD INSTELLEN

60ms/110VAC
60ms/110VAC
HOLD UP TIJD (Typ.)

20ms/230VAC

10ms/110VAC
INVOER
SPANNINGSBEREIK

100~265Vac

100~265Vac
FREQUENTIEBEREIK
50~60Hz
50~60Hz
VERMOGENSFACTOR (typ.)
EFFICINTIE (typ.)
﹥83%
﹥84%
AC STROOM (typ.)
0.45A/110V, 0.25A/220V

0.45A/110V, 0.25A/220V

INRUSH-STROOM (Typ.)