Sales

AC naar DC24V 40W LED-transformator met constante spanning

Product detail

Product name: AC to DC12 V 40W Constant voltage LED power supply

Specifications

1. Modle: SMT-024-040VW

2. Input: 100~265vAC / 47-63HZ

3. Output : 24V 1.67Amp 40Watt

4. Case material: Aluminum

5. Waterproof rate: IP67

6. Unit weight: 205g

7. Product size: 217*29*21

8. Box size: 299*224*176mm

9. Pack qty: 50pcs/ctn

10.Pack weight: 11kg/ctn

11.Produt cord: 18AWG*20CM

13.Two years warranty (We promise to replace new ones to you if there is any defective happen during the warranty period)

SPECIFICAION
MODEL		SMT-012-040VW	SMT-024-040VW
OUTPUT	DC VOLTAGE	12V	24V
	RATED CURRENT	3.33A	1.67A
	CURRENT RANGE	0~3.33A	0~1.67A
	RATED POWER	40W	42W
	RIPPLE&NOISE(max)	1.1V	1.12V
	voltage TOLERANCE	12V±5%	24V±5%
	SETUP RISE TIME	80ms/110VAC	80ms/110VAC
	HOLD UP TIME(Typ.)	60ms/110VAC	60ms/110VAC
INPUT	VOLTAGE RANGE	100~265Vac	100~265Vac
	FREQUENCY RANGE	50~60Hz	50~60Hz
	POWER FACTOR(Typ.)
	EFFICIENCY(Typ.)	﹥83%	﹥82%
	AC CURRENT(Typ.)	0.3A/110V, 0.5A/220V	0.33A/110V,0.45A/220V
	INRUSH CURRENT (Typ.)	COLD START 30A/110~220VAC
PROTECTION	Short circuit	Protection type:recovers automatically after condition is removed
	Overload	overload protected@145-160% above peak rating
	Over temperature	Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT	WORKING TEMP.	-30~+50℃ (Refer to output load derating curve)
	WORKING HUMIDITY	20~99% RH non-condensing(Waterproof)
	STORAGE TEMP.,HUMIDITY	-40~+80℃,10~99%RH
SAFETY&EMC	SAFETY STANDARDS	UL, CE Mark(LVD), IP67
	WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC IP-GND:1.5KVAC
	EMC Test Standards	EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006
		EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006
NOTE	1.All parameters NOT specially mentoned are measured at 110VAC, 220VAC input,rated load and 25℃ of ambient temperature.
	2.Ripple&noise are measured at 20MHz of bandwidth by using a 12


[1mProductnaam: AC naar DC