12v 24v 120w led transformer driver power
Waterproof IP67 12v 24v 120w led driver are ETL CE and ROHS approval, high PFC 0.95 for high solutions LEDs, like LUMINAIRE led lamps 12v.
Specification
MODEL | SMT-012-120VW | SMT-024-120VW | |
OUTPUT | DC VOLTAGE | 12V | 24V |
RATED CURRENT | 10.0A | 5.0A | |
CURRENT RANGE | 0~10.0A | 0~5.0A | |
RATED POWER | 120W | 120W | |
RIPPLE&NOISE(max) | 150mV | 150mV | |
VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |
SETUP RISE TIME | 80ms/110V,220VAC | ||
HOLD UP TIME(Typ.) | 60ms/110V,220VAC | ||
INPUT | VOLTAGE RANGE | 100~265VAC | |
FREQUENCY RANGE | 50~60Hz | ||
POWER FACTOR(Typ.) | |||
EFFICIENCY(Typ.) | ﹥83% | ||
AC CURRENT(Typ.) | 0.92A/110VAC, 0.86A/220VAC | ||
INRUSH CURRENT (Typ.) | COLD START 50A/110VAC, 220VAC | ||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
Overload | overload protected@145-160% above peak rating | ||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |
WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||
STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
SAFETY&EMC | SAFETY STANDARDS | CE ETL Mark(LVD),IP67 | |
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||
EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||
NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature. | ||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||
[1m12v 24v 120w led transformator driver power
Waterdicht IP67 12v24v 120w led-stuurprogrammazijn ETL CE- en ROHS-goedkeuring, hoge PFC 0,95 voor LED's met hoge oplossingen, zoals LUMINAIRE led-lampen 12v.
Specificatie
MODELSMT-012-120VWSMT-024-120VW UITGANG GELIJKSTROOMSPANNING 12V 24V NOMINALE STROOM