HIDEA produce SMT-012-012VW It is a compact size mini led driver ETL listed. The design and certification of Class 2 12v 12w non dimmable led driver allow direct wiring into the 120V input or 220V input. It can also match good well with KICHER led tape lights.
Specification
MODEL | SMT-012-012VW | SMT-024-012VW | |
OUTPUT | DC VOLTAGE | 12V | 24V |
RATED CURRENT | 1A | 0.5A | |
CURRENT RANGE | 0~1A | 0~0.5A | |
RATED POWER | 12W | 12W | |
RIPPLE&NOISE(max) | <700mV | <400mV | |
VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |
INPUT | VOLTAGE RANGE | 90~265VAC | |
FREQUENCY RANGE | 47~63Hz | ||
POWER FACTOR(Typ.) | |||
EFFICIENCY(Typ.) | >81% | >81% | |
AC CURRENT(Typ.) | 0.20A @110VAC / 0.099A@220VAC | ||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
Overload | overload protected@145-160% above peak rating | ||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |
INGRESS PROTECTION | IP67 design for indoor or outdoor installations | ||
STORAGE TEMP | -40~+80℃ | ||
SAFETY&EMC | SAFETY STANDARDS | EN61347-1;EN61347-2-13;SELV;IP67 UL, CE, ROHS approved | |
WITHSTAND VOLTAGE | I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||
EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||
NOTE | 1.All parameters NOT specially mentioned are measured at 110V~220VAC input,rated load and 25℃ of ambient temperature. | ||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||
[1mHIDEA produceert SMT-012-012VW Het is een compact formaat mini led driver ETL vermeld.
Het ontwerp en de certificering van klasse 2 12v12w niet-dimbare led-drive directe bedrading naar de 120V-ingang of 220V-ingang mogelijk maken. Het kan ook goed matchen met KICHER led-tapeverlichting.SpecificatieMODEL
SMT-012-012VW
SMT-024-012VWUITGANGGELIJKSTROOMSPANNING 12V 24V NOMINALE STROOM 0,5A HUIDIG AANBOD