Sales

AC naar DC24V 200W LED-voeding met constante spanning

Product detail

Product Name: AC to DC24 V 200W Constant voltage LED power supply

SPECIFICAION
MODEL		SMT-012-200VW	SMT-024-200VW	SMT-036-200VW
OUTPUT	DC VOLTAGE	12V	24V	36V
	RATED CURRENT	16.67A	8.33A	5.55A
	CURRENT RANGE	0~16.67A	0~8.33A	0~5.55A
	RATED POWER	200W	200W	150W
	RIPPLE&NOISE(max)	150mV	150mV	150mV
	VOLTAGE TOLERANCE	±0.5V	±0.5V	±0.5V
	SETUP RISE TIME	80ms/110VAC, 220VAC
	HOLD UP TIME(Typ.)	60ms/110VAC, 220VAC
INPUT	VOLTAGE RANGE	90~265VAC
	FREQUENCY RANGE	50~60Hz
	POWER FACTOR(Typ.)	>0.95@110VAC ; >0.98@220VAC
	EFFICIENCY(Typ.)	﹥91%
	AC CURRENT(Typ.)	2.10A@110VAC; 1.01A@220VAC
	INRUSH CURRENT (Typ.)	COLD START 50A/110VAC, 220VAC
PROTECTION	Short circuit	Protection type:recovers automatically after condition is removed
	Overload	overload protected@145-160% above peak rating
	Over temperature	Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT	WORKING TEMP.	-30~+55℃ (Refer to output load derating curve)
	WORKING HUMIDITY	20~99% RH non-condensing(Waterproof)
	STORAGE TEMP.,HUMIDITY	-40~+80℃,10~99%RH
SAFETY&EMC	SAFETY STANDARDS	CE ETL Mark(EMC,LVD),IP67
	WITHSTAND VOLTAGE	I/P-O/P:3.0KVAC IP-GND:3.0KVAC
	EMC Test Standards	EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006
		EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006
NOTE	1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature.
	2.Ripple&noise are measured at 20MHz of bandwidth by using a 12

	[1mProductnaam: AC naar DC
V 200W Constante spanning