Sales

12V 30W LED-stroomvoorziening met constante spanning;

Product detail

Product name: AC to DC12 V 30W Constant voltage LED power supply

SPECIFICAION
MODEL		SMT-012-030WW	SMT-024-030VW	SMT-036-030VW
OUTPUT	DC VOLTAGE	12V	24V	36V
	RATED CURRENT	2.5Amp	1.25Amp	0.83Amp
	CURRENT RANGE	0~2.5A	0~1.25A	0~0.83A
	RATED POWER	30W	30W	30W
	RIPPLE&NOISE(max)	150mV	150mV	150mV
	CURRENT TOLERANCE	±0.5V	±0.5V	±0.5V
	SETUP RISE TIME	80ms/110,220VAC	81ms/110,220VAC	82ms/110,220VAC
	HOLD UP TIME(Typ.)	60ms/110-220VAC	60ms/110-220VAC	60ms/110-220VAC
INPUT	VOLTAGE RANGE	100~265VAC
	FREQUENCY RANGE	50~60Hz
	POWER FACTOR(Typ.)
	EFFICIENCY(Typ.)	>83%	>83%	>83%
	AC CURRENT(Typ.)	3.5A/110,220VAC	2.0A/110,220VAC	1.5A/110,220VAC
	INRUSH CURRENT (Typ.)	COLD START 50A/110~220VAC
PROTECTION	Short circuit	Protection type:recovers automatically after condition is removed
	Overload	overload protected@145-160% above peak rating
	Over temperature	Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT	WORKING TEMP.	-30~+50℃ (Refer to output load derating curve)
	WORKING HUMIDITY	20~99% RH non-condensing(Waterproof)
	STORAGE TEMP.,HUMIDITY	-40~+80℃,10~99%RH
SAFETY&EMC	SAFETY STANDARDS	ETL/ROHS/CE Mark(EMC,LVD),IP67
	WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC IP-GND:1.5KVAC
	EMC Test Standards	EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006
	EMC Test Standards	EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006
NOTE	1.All parameters NOT specially mentoned are measured at 110V,220VAC input,rated load and 25℃ of ambient temperature.
	2.Ripple&noise are measured at 20MHz of bandwidth by using a 12


[1mProductnaam: AC naar DC